Supermicro X8DTN+ Manuel d'utilisateur télécharger pdf (Page 87)

Appendix B: Installing the Windows OS

B-1

Appendix B

Installing the Windows OS

After all hardware components have been installed, you must ﬁ rst conﬁ gure Intel

South Bridge RAID Settings before you install the Windows OS and other software

drivers. To conﬁ gure RAID settings, please refer to RAID Conﬁ guration User Guides

posted on our website at www.supermicro.com/support/manuals.

B-1 Installing the Windows OS to a RAID System

Insert Microsoft's Windows XP/2003/2008/Vista Setup CD in the CD Driver, 1.

and the system will start booting up from CD.

Press the <F6> key when the message-" Press F6 if you need to install a 2.

third party SCSI or RAID driver" displays.

When the Windows OS Setup screen appears, press "S" to specify additional 3.

device(s).

Insert the driver diskette-"Intel AA Windows XP/2003/2008/Vista Driver for 4.

ICH10R" into Drive A: and press the <Enter> key.

Choose the Intel(R) ICH10R 5. SATA RAID Controller from the list indicated in

the Windows OS Setup Screen, and press the <Enter> key.

Press the <Enter> key to continue the installation process. (If you need to 6.

specify any additional devices to be installed, do it at this time.) Once all

devices are speciﬁ ed, press the <Enter> key to continue with the installation.

From the Windows OS Setup screen, press the <Enter> key. The Windows 7.

OS Setup will automatically load all device ﬁ les and then, continue the Win-

dows OS installation.

After the Windows OS Installation is completed, the system will automatically 8.

reboot.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 93

Pas de commentaire

Supermicro X8DTN+ Manuel d'utilisateur Page 87