Supermicro X8DTN+ Manuel d'utilisateur télécharger pdf (Page 27)

Chapter 2: Installation

2-5

Removing the Heatsink

Warning: We do not recommend that the CPU or the heatsink be re-

moved. However, if you do need to remove the heatsink, please follow

the instructions below to uninstall the heatsink and prevent damage to

the CPU or other components.

Unplug the power cord from the 1.

power supply.

Disconnect the heatsink fan 2.

wires from the CPU fan header.

Using a screwdriver, loosen and 3.

remove the heatsink screws

from the motherboard in the se-

quence as show in the picture

on the right.

Hold the heatsink as shown 4.

in the picture on the right and

gently wriggle the heatsink to

loosen it from the CPU. (Do not

use excessive force when wrig-

gling the heatsink.)

Once the CPU is loosened, 5.

remove the heatsink from the

CPU socket.

To reinstall the CPU and the 6.

heatsink, clean the surface of

the CPU and the heatsink to get

rid of the old thermal grease.

Reapply the proper amount of

thermal grease on the surface

before reinstalling them on the

motherboard.

Using a screwdriver to

remove Screw#1

Remove Screw#2

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 94 95

Pas de commentaire

Supermicro X8DTN+ Manuel d'utilisateur Page 27