Supermicro X10SRG-F Manuel d'utilisateur télécharger pdf (Page 74)

4-2

X10SRG-F User’s Manual

How to Start the Setup Utility

Normally, the only visible Power-On Self-Test (POST) routine is the memory test.

Asthememoryisbeingtested,pressthe<Delete>keytoenterthemainmenuof

the AMI BIOS setup utility. From the main menu, you can access the other setup

screens.AnAMIBIOSidenticationstringisdisplayedattheleftbottomcornerof

the screen, below the copyright message.

Warning: Do not upgrade the BIOS unless your system has a BIOS-related issue.

Flashing the wrong BIOS can cause irreparable damage to the system. In no event

shall Supermicro be liable for direct, indirect, special, incidental, or consequential dam-

ages arising from a BIOS update. If you have to update the BIOS, do not shut down

or reset the system while the BIOS is updating. This is to avoid possible boot failure.

4-2 Main Setup

WhenyourstentertheAMIBIOSsetuputility,youwillentertheMainsetupscreen.

You can always return to the Main setup screen by selecting the Main tab on the

top of the screen. The Main BIOS setup screen is shown below.

The following Main menu items will be displayed:

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 136 137

Pas de commentaire

Supermicro X10SRG-F Manuel d'utilisateur Page 74