Supermicro CSE-113TQ-563CB Manuel d'utilisateur télécharger pdf (Page 30)

SC113 Chassis Manual

5-6

Figure 5-5: Removing the Backplane

Removing the Screws

Reconnect the data and power cables.8.

Replace the chassis cover (replace the server in the rack, if necessary) and 9.

power up the system.

5-6 Removing the Backplane

The SC113 chassis backplane is located behind the hard drives and in front of the

front system fans. In order to change the jumper settings on the backplane, it may

be necessary to remove the backplane from the chassis.

Removing the Backplane from the Chassis

Power down and unplug the system from any power source.1.

Disconnect the cabling to the backplane. 2.

Remove the ve upper screws at the top of the backplane, indicated by the 3.

arrows below.

Lift the backplane up and out of the chassis.4.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 67 68

Pas de commentaire

Supermicro CSE-113TQ-563CB Manuel d'utilisateur Page 30