Supermicro CSE-213LT-563LPB Manuel d'utilisateur télécharger pdf (Page 30)

SC213 Chassis Manual

4-10

Figure 4-11: Installing the UIO Riser Card Bracket

Installing Riser Cards and Add-on Cards in UIO Models

Installing the Riser Card - UIO Chassis Models

Remove the chassis cover.1.

Remove the riser bracket.2.

Install the riser card onto the riser bracket. Note that there are different cards 3.

for the right and left side of the bracket.

Gently slide the riser card bracket with the riser card installed into the chassis 4.

and simultaneously plug the riser card into the slot on the motherboard.

Locate the three screws on your riser card bracket and secure it to the chas-5.

sis as illustrated above.

Secure the head

of the riser

card bracket to

the rear of the

chassis with two

screws

Secure the tail

of the riser

card bracket

to the fan tray

with one screw

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 69 70

Pas de commentaire

Supermicro CSE-213LT-563LPB Manuel d'utilisateur Page 30