Supermicro CSE-512L-200B Manuel d'utilisateur télécharger pdf (Page 47)

5-17

Chapter 5: Chassis Setup and Maintenance

Replacing the Chassis LED Panel

In the unlikely event that the chassis LED and buttons fail, the panel can be replaced.

Replacement parts can be ordered from Supermicro or an authorized reseller.

Replacing the Chassis LED Panel

Power down and unplug the system.1.

Remove the chassis cover.2.

Disconnect the cord to the front panel.3.

Locate and remove three screws holding the panel in place. (If your chassis 4.

supports dual hard drives, you may have to remove the second hard drive

from the chassis).

Install the new LED panel and secure the unit with three screws.5.

Reconnect the cables to the LED panel and if necessary, replace the hard 6.

drive.

Figure 5-14: Replacing the LED Panel

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 69 70

Pas de commentaire

Supermicro CSE-512L-200B Manuel d'utilisateur Page 47