Supermicro CSE-733T-450-B Manuel d'utilisateur télécharger pdf (Page 29)

4-11

Chapter 4: Chassis Setup and Maintenance

Motherboard Installation

Installing the Motherboard:

Review the documentation that came with your motherboard. Become familiar 1.

with component placement, requirements, precautions, and cable connec-

tions.

Open the chassis cover.2.

As required by your motherboard, install standoffs in any areas that do not 3.

have a permanent standoff. To do this:

A. Place a hexagonal standoff screw through the bottom the chassis.

B. Secure the screw with the hexagon nut (rounded side up).

Lay the motherboard on the chassis aligning the permanent and optional 4.

standoffs

Secure the motherboard to the chassis using the rounded, Phillips head 5.

screws. Do not exceed nine pounds of torque when tightening the mother-

board.

Secure the CPU(s), heatsinks, and other components to the motherboard as 6.

described in the motherboard documentation.

Connect the cables between the motherboard, backplane, chassis, front pan-7.

el, and power supply, as needed. Also, the fans may be temporarily removed

to allow access to the backplane ports.

Figure 4-11: Installing the Motherboard

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 61 62

Pas de commentaire

Supermicro CSE-733T-450-B Manuel d'utilisateur Page 29