Supermicro CSE-743I-R760B Guide de l'utilisateur télécharger pdf (Page 48)

SC743 Chassis User's Guide

A-6

A. Accessing Hot Swap Drives:

1. Push the release button and pull up the handle to release the

drive tray as shown below on the left:

4. Hardware Installation Procedures

(*Notes: For the CSE-M34S: 1. SCSI IDs are assigned automatically by the

backplane. Do not set IDs manually on the drives. See the previous section

for SCSI ID jumper settings. 2. SCSI termination is enabled by default on the

SCSI backplane. 3. To install the CSE-M34 Mobile Rack into the SC743

chassis, please refer to Chapter 2 Section J on Page 2-17 to 2-19 for

installation instructions.)

Push the release button

Pull up the

handle

2. Pull out drive trays as shown below on the right:

3. Mount a drive in a carrier and secure it with screws as shown

below:

Mount a drive

into a carrier

Secure the drive

with screws

Pull up the

drive trays

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 59 60

Pas de commentaire

Supermicro CSE-743I-R760B Guide de l'utilisateur Page 48