Supermicro CSE-809T-1200B Manuel d'utilisateur télécharger pdf (Page 26)

SC809 Chassis Manual

5-4

Figure 5-3: Removing Dummy Drive from Tray

Installing a Hard Drive into a Drive Carrier

Insert a drive into the carrier with the PCB side facing down and the connec-1.

tor end toward the rear of the carrier.

Align the drive in the carrier so that the screw holes of both line up. Note that 2.

there are holes in the carrier marked “SATA” to aid in correct installation.

Secure the drive to the carrier with four screws as illustrated below.3.

Insert the drive carrier into its bay, keeping the carrier oriented so that the 4.

hard drive is on the top of the carrier and the release button is on the right

side. When the carrier reaches the rear of the bay, the release handle will

retract.

Push the handle in until it clicks into its locked position.5.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 59 60

Pas de commentaire

Supermicro CSE-809T-1200B Manuel d'utilisateur Page 26