Supermicro CSE-PTJBOD-CB2 Manuel d'utilisateur télécharger pdf (Page 35)

SC837J Chassis Manual

5-5

Figure 7-3: Installing the Outer Rails

Installing the Outer Rails on the Rack

Outer rails attach to the server rack and hold the chassis in place. The outer rails

for the SC837J chassis extend between thirty inches and thirty-three inches.

Installing the Outer Rails

1. Begin by measuring the distance from the front to the back of the rack.

2. Slide the shorter outer rail (A) into the longer outer rail (B).

3. Attach the front of the shorter outer rail (A) to the front of the rack and the

back of the longer outer rail (B) to the rear of the rack.

4. Adjust both the shorter and longer outer rails to the proper distance so that

they t snugly into the rack and secure with the screws provided.

5. Press the release tab (C) on the inside of the outer rail to release the outer

rail extension (D)

6. Repeat steps 1 through 5 for the remaining outer rail.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 75 76

Pas de commentaire

Supermicro CSE-PTJBOD-CB2 Manuel d'utilisateur Page 35