Supermicro AOC-CGP-I2 Guide de l'utilisateur télécharger pdf (Page 15)

3-3

Chapter 3: Installation

3-4 Installing the Add-on Card

Follow the steps below to install the add-on card into your system.

1. Remove the server cover and, if necessary, set aside any screws for later

use.

2. Remove the add-on card slot cover. If the case requires a screw, place the

screw aside for later use.

3. Position the add-on card in the slot directly over the connector, and gently

push down on both sides of the card until it slides into the PCI connector.

4. Secure the add-on card to the chassis. If required, use the screw that you

previously removed.

5. Attach any necessary external cables to the add-on card.

6. Replace the chassis cover.

7. Plug the power cord into the wall socket, and power up the system.

3-5 Installing the Windows Operating System

Follow the steps below to install the drivers needed for your Windows OS support.

The controller comes with a driver on the CD-ROM CDR-NIC.

1. Run the CDR-NIC. (If you do not have a product CD-ROM, download drivers

from the Supermicro Support Website and then transfer them to your system.)

2. When the SUPERMICRO window appears, click on the computer icon next to

the product model.

Note: If the FOUND NEW HARDWARE WIZARD screen displays on your

system, click CANCEL.

1 2 ... 10 11 12 13 14 15 16 17 18 19

Pas de commentaire

Supermicro AOC-CGP-I2 Guide de l'utilisateur Page 15