Supermicro AOC-STG-I2 Guide de l'utilisateur télécharger pdf (Page 12)

3-1

Safety Information and Technical Speciﬁ cations

Chapter 3

Installation

3-1 Before Installation

Before installation, do the following

Power down the system.

Remove the power cord from the wall socket.

Use industry standard anti-static equipment (i.e. gloves or wrist strap) and/or

an environment that prevents accidental electrostatic discharge.

Familiarize yourself with the server, motherboard, and/or chassis documenta-

tion.

Conﬁ rm that your Operating System includes the latest updates and hotﬁ xes.

3-2 Hardware Installation

To install the add-on card, do the following:

Remove the server cover and, if necessary, set aside any screws for later

use.

Remove the add-on card slot cover. If the case requires a screw, place the

screw aside for later use.

Position the add-on card in the slot directly over the connector and gently

push down on both sides of the card until it slides into the PCI connector.

Secure the add-on card to the chassis. If required, use the screw that you

previously removed.

Attach any necessary internal and external cables to the add-on card (see

page v for required cables).

Replace the chassis cover.

Plug the power cord into the wall socket and power up the system.

1 2 ... 7 8 9 10 11 12 13 14 15

Pas de commentaire

Supermicro AOC-STG-I2 Guide de l'utilisateur Page 12