Supermicro Mobile Rack CSE-M14T Guide de l'utilisateur télécharger pdf (Page 13)

3-3

Safety Information and Technical Speciﬁ cations

3-4 Cooling Fan Installation and Removal

If your M14T mobile rack is a stand-alone model, you will need to install the cooling

fan onto the M14T before operating it.

Installing the Cooling Fan

Place the cooling fan on the M14T mobile rack, aligning the mounting holes in 1.

the fan housing with the holes on the mobile rack.

Secure the fan to the mobile rack with two screws on each side of the fan.2.

Connect the cooling fan cable to the fan connector as illustrated.3.

To remove the cooling fan, simply reverse the procedure above:

Removing the Cooling Fan

Disconnect the cooling fan cable.1.

Remove the screws securing the fan to the M14T2.

Remove the fan from the M14T.3.

Figure 3-1: Installing the Cooling Fan

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

Pas de commentaire

Supermicro Mobile Rack CSE-M14T Guide de l'utilisateur Page 13