Supermicro X10DRH-I Manuel d'utilisateur télécharger pdf (Page 80)

4-6

X10DRH-C/CT/i/iT Motherboard User’s Manual

CPU Conguration

This submenu displays the following CPU information as detected by the BIOS. It

also allows the user to congure CPU settings.

•Processor Socket

•Processor ID

•Processor Frequency

•Processor Max Ratio

•Processor Min Ratio

•Microcode Revision

•L1 Cache RAM

•L2 Cache RAM

•L3 Cache RAM

•CPU 1 Version

•CPU 2 Version

Clock Spread Spectrum

Select Enabled to allow the BIOS to monitor and attempt to reduce the level of

Electromagnetic Interference caused by the components whenever needed. The

options are Disabled and Enabled.

Hyper-Threading (All)

Select Enable to support Intel's Hyper-threading Technology to enhance CPU per-

formance. The options are Enable and Disable.

Cores Enabled

This feature allows the user to determine the number of CPU cores to enable.

Enter "0" to enable all cores. The default setting is 0, which enables all CPU cores

in the system.

Execute Disable Bit (Available if supported by the OS & the CPU)

Select Enable for Execute Disable Bit Technology support, which will allow the

processor to designate areas in the system memory where an application code

can execute and where it cannot, thus preventing a worm or a virus from ooding

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 130 131

Pas de commentaire

Supermicro X10DRH-I Manuel d'utilisateur Page 80