Supermicro CSE-825TQ-R720UB Manuel d'utilisateur télécharger pdf (Page 32)

SC825 Chassis Manual

5-10

Installing the Motherboard

Review the documentation that came with your motherboard. Become familiar

with component placement, requirements, precautions, and cable connec

tions.

Open the chassis cover.

As required by your motherboard, install standoffs in any areas that do not

have a permanent standoff. To do this:

A. Place a hexagonal standoff screw through the bottom the chassis.

B. Secure the screw with the hexagon nut (rounded side up).

Lay the motherboard on the chassis aligning the permanent and optional

standoffs

Secure the motherboard to the chassis using the rounded, Phillips head

screws.

Secure the CPU(s), heatsinks, and other components to the motherboard as

described in the motherboard documentation.

Connect the cables between the motherboard, backplane, chassis, front pan

el, and power supply, as needed. Also, the fans may be temporarily removed

to allow access to the backplane ports.

Figure 5-9: Chassis Standoffs

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 71 72

Pas de commentaire

Supermicro CSE-825TQ-R720UB Manuel d'utilisateur Page 32