Supermicro SuperWorkstation 5037A-i Manuel d'utilisateur télécharger pdf (Page 31)

Chapter 5: Advanced Serverboard Setup

5-9

Removing the Heatsink

Caution: We do not recommend that the CPU or the heatsink be removed. How-

ever, if you do need to uninstall the heatsink, please follow the instructions below

to uninstall the heatsink to prevent damage done to the CPU or the CPU socket.

Additional warnings and cautions can be found on the Supermicro Web site at http://

www.supermicro.com/about/policies/safety_information.cfm.

1. Remove the power cord from the system before removing the heatsink.

2. Unscrew the heatsink screws from the motherboard in the sequence as

shown in the illustration below.

3. Gently wriggle the heatsink to loosen it from the CPU. (Do not use excessive

force when wriggling the heatsink!)

4. Once the heatsink is loosened, remove it from the CPU socket.

5. Remove the used thermal grease and clean the surface of the CPU and the

heatsink, Reapply the proper amount of thermal grease on the surface before

reinstalling the heatsink.

Loosen screws

in sequence as

shown.

Screw#2

Screw#1

Screw#3

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 101 102

Pas de commentaire

Supermicro SuperWorkstation 5037A-i Manuel d'utilisateur Page 31