Supermicro CSE-747TQ-R1400B Manuel d'utilisateur télécharger pdf (Page 35)

5-13

Chapter 5: Chassis Setup and Maintenance

Mobile Rack

Hard Drive

Rails

Pull the rst drive release tab and push the drive tray toward the front of the 3.

chassis. Repeat this for all three tabs.

Remove the hard drive tray rails from the hard drive tray. To do this, you must 4.

remove two screws from each side. Do this for all three hard drive trays.

Hard Drive Rails

Hard Drive Tray

Figure 5-13: Removing the Hard Drive Rails

Figure 5-14: Adding Hard Drive Rails to a Storage Rack

Attach the rails to a DVD-ROM, CD-ROM, oppy drive, or other peripheral. 5.

The rails should t any standard sized peripherals.

Install all six hard drive rails to the mobile rack. Each individual rail requires 6.

two screws. Also, make sure the arrow on the rail points toward the front of

the chassis.

Slide the mobile rack into the storage module and chassis.7.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 79 80

Pas de commentaire

Supermicro CSE-747TQ-R1400B Manuel d'utilisateur Page 35