Supermicro 5018D-MF Manuel d'utilisateur télécharger pdf (Page 95)

Chapter 7: BIOS

7-13

• CAS Latency (tCL)

• Minimum Delay Time

• CAS to RAS (tRCDmin)

• Row Precharge (tRPmin)

• Active to Precharege (tRASmin)

Memory Frequency Limiter

This feature sets the limit of memory frequency for DIMM modules installed on

the the motherboard. The options are 1067 (MHz), 1333 (MHz), 1600 (MHz),

and Auto.

Max TOLUD (Top of Low Usable DRAM)

This feature sets the maximum TOLUD value, which speciﬁ es the "Top of Low

Usable DRAM" memory space to be used by internal graphics devices, GTT

Stolen Memory, and TSEG, respectively, if these devices are enabled. The op-

tions are Enabled and Dynamic, 1 GB, 1.25 GB, 1.5 GB, 1.75 GB,. 2 GB, 2.25

GB, 2.5 GB, 2.75 GB, 3 GB and 3.25 GB.

Note: TSEG is a block of memory that is only accessible by the processor

while operating in SMM mode.

Memory Scrambler

This feature enables or disables memory scrambler support for memory error

correction. The settings are Enabled and Disabled.



PCH-IO Conﬁ guration

This item displays the information for PCH-IO Chip.

• Intel PCH Rev ID

• USB Conﬁ guration

• USB Devices

EHCI1

Select Enabled to enable EHCI (Enhanced Host Controller Interface) Controller 1

for USB 2.0 support. One EHCI controller must always be enabled. The settings

are Enabled and Disabled.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 119 120

Pas de commentaire

Supermicro 5018D-MF Manuel d'utilisateur Page 95