Supermicro CSE-808T-1200B Manuel d'utilisateur télécharger pdf (Page 30)

SC808 Chassis Manual

5-8

Installing Expansion Cards

Disconnect the chassis from any power source, lay the chassis on a at sur-1.

face, and open the chassis cover.

Pull open the expansion card slot clip in the rear of the chassis.2.

Slide the temporary expansion card "L" bracket toward the slot clip and re-3.

move the temporary bracket from the chassis.

Connect the cables between the motherboard, backplane, chassis, front 8.

panel, and power supply, as needed. Also, fans may be temporarily removed

to allow access to the backplane ports.

Replace the expansion card bracket and secure the bracket with a screw.9.

Expansion Slot Setup

SC808 chassis includes I/O slots for expansion cards. Each side supports one low

prole, half-length expansion card for a total of two per system.

Expansion Card

Slot Clip

Temporary "L" Bracket

Figure 5-8: I/O Shield Placement

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 59 60

Pas de commentaire

Supermicro CSE-808T-1200B Manuel d'utilisateur Page 30