Supermicro 1012C-MRF Manuel d'utilisateur télécharger pdf (Page 18)

2-4

A+ Server 1012C-MRF User's Manual

2-4 Installing the System into a Rack

This section provides information on installing the SuperServer 1012C-MRF into a

rack unit. If the system has already been mounted into a rack, you can skip ahead

to Sections 2-5 and 2-6.

Note: the server may be installed as is - rack hardware is optional.

Basic Installation Procedure

The 1012C-MRF server comes with two rack mounting brackets, which are located

on each side at the front of the chassis. To mount the system into a rack, simply

screw these brackets directly to the front of the rack (two screws for each bracket).

As Figure 2-1 shows, the brackets can be located at the front of the chassis (left

ﬁ gure) or moved approximately one-third to the rear of the chassis (right ﬁ gure).

Figure 2-1. Identifying the Sections of the Rack Rails

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 91 92

Pas de commentaire

Supermicro 1012C-MRF Manuel d'utilisateur Page 18