Supermicro 1012C-MRF Manuel d'utilisateur télécharger pdf (Page 56)

5-24

A+ Server 1012C-MRF User's Manual

After exiting the BIOS Setup Utility, the system will reboot. When prompted 4.

during the startup, press the <CTRL+A> key when prompted to run the

Adaptec RAID Utility program (see Figure 5-7).

Using the Adaptec RAID Utility

The Adaptec® RAID Utility program is where you can deﬁ ne the drives you want

to include in the RAID array and the mode and type of RAID.

Figure 5-7.Adaptec RAID Utility Program Screen

Installing the RAID Driver During OS Installation

You may also use the procedure below to install the RAID driver during the Window's

OS installation:

With the Windows OS installation CD in the CD-ROM drive, restart the 1.

system.

When you see the prompt, hit the <F6> key to enter Windows setup.2.

Eventually a blue screen will appear with a message that begins "Windows 3.

could not determine the type of one or more storage devices . . ." When you

see the screen, hit the <S> key to "Specify Additional Device", then insert the

driver diskette you just created into the ﬂ oppy drive.

Highlight "Manufuacturer Supplied Hardware Support Disk" and hit the 4.

<Enter> key.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 91 92

Pas de commentaire

Supermicro 1012C-MRF Manuel d'utilisateur Page 56