Supermicro 5017P-TF Manuel d'utilisateur télécharger pdf (Page 25)

Chapter 4: System Safety

4-1

Chapter 4

System Safety

4-1 Electrical Safety Precautions

Basic electrical safety precautions should be followed to protect yourself from harm

and the SuperServer 5017P-TLN4F/TF from damage:

•Be aware of the locations of the power on/off switch on the chassis as well

as the room's emergency power-off switch, disconnection switch or electrical

outlet. If an electrical accident occurs, you can then quickly remove power from

the system.

•Do not work alone when working with high voltage components.

•Power should always be disconnected from the system when removing or install-

ing main system components, such as the serverboard and memory modules.

When disconnecting power, you should rst power down the system with the

operating system rst and then unplug the power cords of all the power supply

units in the system.

•When working around exposed electrical circuits, another person who is familiar

with the power-off controls should be nearby to switch off the power if neces-

sary.

•Use only one hand when working with powered-on electrical equipment. This

is to avoid making a complete circuit, which will cause electrical shock. Use

extreme caution when using metal tools, which can easily damage any electrical

components or circuit boards they come into contact with.

•Do not use mats designed to decrease static electrical discharge as protection

from electrical shock. Instead, use rubber mats that have been specically

designed as electrical insulators.

•The power supply power cords must include a grounding plug and must be

plugged into grounded electrical outlets.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 94 95

Pas de commentaire

Supermicro 5017P-TF Manuel d'utilisateur Page 25