Supermicro SYS-5038A-IL Manuel d'utilisateur télécharger pdf (Page 47)

Chapter 5: Advanced Serverboard Setup

5-7

8. Repeat Step 7 to insert all four

heatsink fasteners into the mounting

holes.

9. Once all four fasteners are securely

inserted into the mounting holes,

and the heatsink is properly installed

on the motherboard, connect the

heatsink fan wires to the CPU Fan

connector.

Removing the Heatsink

Warning: We do not recommend removing

theCPU or the heatsink. However, if neces-

sary, please follow the instructions below to

prevent damage done to the CPU or other

components.

1. Unplug the power cord from the pow-

er supply and disconnect the heatsink

fan wires from the CPU fan header.

2. Gently press on the fastener cap and

turn it counterclockwise to make a

1/4 (90

) turn, and pull the fastener

upward to loosen it.

3. Repeat Step 3 to loosen all fasteners

from their mounting holes.

4. With all fasteners loosened, remove

the heatsink from the CPU.

Pull Up

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 121 122

Pas de commentaire

Supermicro SYS-5038A-IL Manuel d'utilisateur Page 47