Supermicro SYS-5038A-IL Manuel d'utilisateur télécharger pdf (Page 45)

Chapter 5: Advanced Serverboard Setup

5-5

5. Align the CPU key, which is a semi-

circle cutout, against the socket

key, which is the notch below the

gold color dot on the side of the

socket.

6. Align pin 1 of the CPU against pin 1

of the CPU socket.

7. Once both CPU and the socket are

aligned, carefully lower the CPU

straight down into the socket. (To

avoid damaging the CPU or the

socket, do not rub the CPU against

the surface of the socket or its

pins.)

8. With the CPU inside the socket,

inspect the four corners of the CPU

to make sure that the CPU is prop-

erly installed.

9. Once the CPU is securely seated

on the socket, lower the CPU load

plate to the socket.

10. Use your thumb to gently push the

socket clip down to the clip lock.

Warning: Please save the plastic cap.

The serverboard must be shipped with

the plastic cap properly installed to

protect the CPU socket pins. Shipment

without the plastic cap properly installed

will cause damage to the socket pins.

CPU Pin 1

CPU Key

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 121 122

Pas de commentaire

Supermicro SYS-5038A-IL Manuel d'utilisateur Page 45